#Product Trends
Manufacture of individual boat carpets
according to your wishes and dimensions
We manufacture carpets in individual shapes for yachts, boats, caravans etc. according to your specifications. A boat carpet is characterized by a special quality. These include predominantly UV resistance, water resistance (even against salt water) and high robustness. After all, the carpet should give many years of pleasure.
In order to make you an offer we need the following information:
Place the individual old coverings in the same way as they actually are. Take a picture of this as a whole picture. Now please enter the width and length dimensions of the individual parts. If the new floorcovering should be in biplane appearance, also draw in the direction of the strip or mark the front of the bow. Indicate whether, or how many, push buttons are to be incorporated – quantity is sufficient for the time being. For each stainless steel push button with base, we charge 6.00 €.
We are happy to tie your boat carpets or floor coverings with loop tape (for indoor areas) or with a UV-resistant, non-slip loop tape (Objekta tape), matching the color of the floor covering (for outdoor and indoor areas). For the running meter border we charge € 12.00 (regardless of the shape).
Create templates
Use a slightly firmer wrapping paper from the roll (do not use light film or wallpaper). On request you will receive stencil foil from us. Draft the shapes and trim the stencils 3-4 mm smaller. The positions of the push buttons are shown below. Mark the top and the bow side on each part. Please arrange adjacent parts with a continuous line.
Due to the large number of boat types and the different series, we have no templates.
If you are satisfied with our offer, send us the old coverings or the finished templates. Furthermore we need from you:
Indication of the surface of your choice,
Your complete address with telephone no. and e-mail address.
