GISATEX® ANTISLIDE marine floor

Qualities: The surface of GISATEX® ANTISLIDE marinefloor is made of 100 %

PVC and is thus resistant to temperature extremes, salt water and ultra-violet light. It is the ideal long-lasting and hardwearing deck surface. The pimpled suface profile lends the material its non-slip quality and pleasant underfoot feeling. When installed with full surface adhesive GISA TEX® ANTISLIDE marine floor is resistant to distortion and abrasion. The textile backing assures lasting adhesion to the deck surface.

Instructions for use: GISA TEX® ANTISLIDE marine floor means that it can be cut to shape with a pair of good size scissors or a modelling knife. We recommend that you first prepare a template when cutting out since this makes it easier to get a good fit in complex shapes. The fine pimple structure on GISA TEX® ANTISLIDE marine floor permits sheets to be placed next to each other without pattern mismatch. Glue squeezed out at edges should be wiped away as soon as possible. We recommend you stick masking tape around the area to be glued before applying the adhesive and allowing it to dry for an hour. Then lay GISA TEX® ANTISLIDE marine floor onto the adhesive bed, smoothing out from the centre and wiping away excess glue as you go. Joins can be additionally sealed

with silicon.

Measurements:

Delivery width: ..................................................... approx. 1,50 m

Material thickness: ..............................................................2 mm

Minimum order: .....................................................................1 m

Length of roll: .......................................................... approx. 15 m