Compressor TCI 310 HB TP

Special model from our showroom New unused, 5 year guarantee

Transportable, powerful breathing air compressor in an extremely robust, stable powder-coated lintel frame with folding transport handles, as a system solution for compressing gases, especially breathing air. This compressor with its gasoline engine and its extremely robust crash frame is made for the toughest professional operating conditions.

Compressor unit:

Air liter capacity 350 L/min, 21 m³/h, 12.36 c.f.m. up to max. 420 bar.

State-of-the-art 3-stage, 3-cylinder compressor block, completely made of aluminum with aluminum cylinders with highly abrasion-resistant NICASIL coating.

Safety valves after each compressor stage. Type-tested and TÜV-approved ventable final pressure safety valve, 2nd and 3rd compressor stage with free-floating pistons.

Reinforced cooling and an additional condensation water separator for continuous operation even at extremely high temperatures and in the tropics with extreme humidity.

Lubrication:

Lubrication with maintenance-free centrifugal pin lubrication, oil quantity of approx. 2.5 L and with maintenance-free low-pressure oil pump.

Air/gas treatment:

Micronic intake air filter, intermediate separator after 2nd and 3rd compressor stage, condensate separation manual with special silencer.

FT 410 three-stage breathing air purification dryer system, TÜV tested, dryer capacity 1,200 m³ (at 20° C) for H²O/oil or optional H²O/oil/CO.

with Airsave Basic dryer cartridge saturation monitoring.

Optional control unit:

Automatic final pressure cut-off as standard.

Automatic condensate drain optional but only possible in conjunction with battery and electric start.

Frame:

Made of 5 mm thick welded U-steel profiles, cladding and covers made of bent sheet steel. Color: RAL 9007 + 9005 medium structure. Rubber vibration dampers, hinged carrying handles.

Compressor and drive motor each vibration-decoupled.

Drive:

By means of V-belt

4-stroke petrol engine, HONDA GX 270 6.3kW, 8.5 HP

Filling system:

2 filling hoses

Accessories supplied:

Dryer housing key, detailed operating manual, parts manual, compressor logbook, compressor filling book, declaration of conformity, certificates for safety valves, separator, dryer unit, dryer cartridge FT 410, intake tube extension.

Dimensions: LWH 135 x 55 x 74 cm, weight approx. 175 kg.