NEW: pressure sensor by Kongsberg Maritime

General purpose pressure transmitter for the engine room

Can be mounted directly on a stud welded to the measuring point - or mounted in a bracket fixed to a bulkhead with a control valve below.

Main specifications

Pressure connection: 1/2" BSP threads

Electrical connection: Via a PG gland on a DIN plug

Range: 0 to 60 bar gauge

Accuracy: <±0. 5% of FRO

Temperature drift: <±0.05% of FRO/°C

Comp. temperature range: -25 to 85°C

Long term stability: <±0.2% of FRO/year

More information

Details

Kongsberg Maritime

Keywords

Inertial navigation systems

Associated Trend items

NEW: ROV video camera by Kongsberg Maritime

This mono CCD camera provides cost effective general purpose under water viewing whilst maintaining compact dimensions. The OE15-108/109 is robustly constructed with a tough, marine grade aluminium alloy pressure housing rated to 3,000 msw operating depth. The camera has a fixed focus lens with a 73° diagonal angle of view in water and a focal range of 200mm to infinit...

More information

GL-7B

The Kongsberg GL-7B uses a capacitive measuring principle for level detection.

The capacitance is measured between the inner and the outer electrode ring. The inner electrode ring is insulated with PTFE, and the outer ring is made of acid resistant steel (AISI 316). If a liquid enters the gap between the two electrode rings, the capacitance will be altered. This change in capacitance is used to detect liquid / no liquid. The GL-7A Level Switch can...

More information

NEW: monitoring software by Kongsberg Maritime

The Helideck Monitoring System is used to analyze helideck motion during helicopter landings to improve safety in hostile weather conditions. The HMS 200 monitors helideck attitude and vertical velocity, wind speed and direction, air temperature and barometric pressure and presents this information to indicate landing conditions. The HMS 200 is typically used offshore on floating production and storage vessels (FPSO) and seismic vessels.

Installation flexibility The motion reference unit MRU, with the aid of selected lever arms in the set-up procedures, enables total installation flexibility. The unit can be installed at the helideck, on the bridge or at any other suitable location on the vessel, the lever arm software makes it possible for the operator to set up the measuring point to be precisely at t...

More information

Products associated

pressure sensor

GT300

Compare

Remove all

Compare up to 10 products