NEW: boat through-hull fitting by Tru Design Plastics Ltd.

The Skin Fitting with Tail body and nut are moulded from glass fibre reinforced nylon composite. High strength, high-modulus glass fibres impregnated into the nylon provide dramatic strength, stiffness, toughness and dimensional stability. These properties allow a significant weight reduction over metallic fittings.

Tru-Design Skin Fittings with Tail eliminate the corrosion and electrical bonding problems associated with metallic fittings.

All Skin Fittings are supplied with a nylon washer to increase locknut support on through hull assembly.

Tru-Design Skin Fittings with Tail are certified by the International Marine Certification Institute (IMCI) & Bureau Veritas to meet; ISO 9093-2 Small craft — Seacocks and through-hull fittings — Part 2: Non-metallic

More information

Details

Tru Design Plastics Ltd.

Keywords

Through-hull fittings

Associated Trend items

NEW: plumbing fitting / for boats by Tru Design Plastics Ltd.

Designed as a connector for same size hoses

Features Long tail feature - The use of 2 hose clamps is recommended for secure hose fitting Manufactured from a glass reinforced nylon composite - High strength and light weight Immune to corrosion and electrolysis - Long life with no concerns over decreased performance due to corrosion Chemical resistant - Impervious to diesel, petrol and antifoul...

More information

NEW: plumbing fitting / for boats by Tru Design Plastics Ltd.

Tru-Design 90° Tails are moulded from a glass reinforced nylon composite. High strength, high-modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness, toughness, and dimensional stability.

Tru-Design Tails eliminate the corrosion and electrical bonding problems associated with metallic fittings. The Tails are designed for twin hose clamps, and to not crush under high load conditions.

More information

NEW: strainer / for boats by Tru Design Plastics Ltd.

Designed and made in New Zealand, the Scoop Strainer is designed to divert large objects away from water intakes while the vessel is moving. This helps eliminate problems with seaweed/seagrass, sticks or rubbish being sucked into engine intakes and blocking or clogging intake filters. The strainer acts as a course first stage filter that is cleaned by water movement.

The Round Strainer is designed for use in stationary applications where there is a risk of sucking in unwanted objects. Tru-Design Intake Strainers eliminate the corrosion and electrical bonding problems associated with metallic fittings. They can be painted over with anti-foul, and can be faired into the hull without concerns of corrosion.

More information

Compare

Remove all

Compare up to 10 products