New project is taking shape: Subsea Knuckle Sormec Crane M4500/EL 50 25 AHC

The AHC crane will be able to lift 50 tones at 25 meters outreach and 600 meters below sea level. Design is following the DNV Lifting Appliance 2.22, EN 13852-1 and FEM. The delivery will take place Q4 2015. Crane will come complete with full safety systems AOPS,MOPS, AHC, CT and also Man-Riding approved for emergency diving bell recovery.

AHC system will compensate 4 meters (+/-2 m) on a heave period of 10 seconds.

More information

Details

Sormec

Keywords

Davits

Associated Trend items

M500/3S offshore telescopic crane for Dudgeon Offshore substation platform successful tested

The crane is to be installed on the topside substation platform which is part of the Dudgeon offshore wind farm project.

Certified by LRS and designed according EN 13852:1 norms, the crane will have an SWL of 5 tons at 21 meters, 1 ton at 30 m (static) and 5 tons @ 10 meters, 2 tons @ 21 meters with 2 meters of significant wave high. The crane was commissioned to Sormec by Sembmarine SLP. Sembmarine SLP was awarded the EPC contract for the Dudgeon Offshore Wind Farm’s substation platfo...

More information

2016 starts around the world

2015 has no doubt been a challenging year for the business, our company and team. End of the year does not mean the end of these challenges. As matter of the fact 2016 starts with two contracts: with our partner Nufoss in Singapore has been awarded to build a elbow knuckle boom crane M1600/EL with a 30 tons winch and a maximum outreach of 22 meters. The crane will operate on board vessel designed by Muhibbah, project H20112 in offshore condition (Significant wave high 1 m).

Second order comes from Egypt with the cooperation of Ellabad, Sormec will deliver a stiff boom crane M08/SA in Alexandria for the project Tug Boat for Assuwit Governate at Canal for Nile Shipyard. The ambition is a successful 2016 with a increasing production all around the world.

More information

Historical new project has been completed: the technological masterpiece M4500/EL

the most challenging project we have faced so far. We learned a lot, we have tested ourselves even more, we have struggled but we have succeeded. Now with the new experience made we are ready to climb higher steps and knock at bigger doors.

Once again our team has done all of us proud, officially inaugurating a technological masterpiece, the offshore elbow crane M4500/EL. Our last major project is an offshore crane with an offset winch made of 50 tons of rated capacity which will be installed in the next months on a BP ship SCV (Subsea construction vessel) Khankendi stationed in Baku. The elbow-knuckle boom...

More information

Compare

Remove all

Compare up to 10 products